Titan Tracker 

Parabolic dish solar tracker for Stirling

Solar tracker for HCPV, CPV, Heliostat and PV


General aspects

Tracking Complete dual-axis 
Use for High concentration (HCPV) 
Max Power Variable with the efficeint of the module 
Max. Capacity Variable
Nominal Capacity 130 m2
Height to raceway 3.522 mm
Max. Height to raceway              Adjustable up to 6.748 mm
Diameter of turn 14.400 mm
Max. Diameter of turn 20.787 mm 
Input Voltage I/III, 50/60 Hz 


Material   Steel S275JR / S250GDZ275 / Tube DIN 2458 Grade ST44
Protection   Hot galvanized  
Joints   Galvanized screws  
Standard  Peterka
CE Label   Yes  
Max. wind speed  (*) 40 m/s in stow position (*)
Wind speed in stow position  Adjustable  
Foundation (concrete) 4.2 m3 with no forms  
Foundation (steel)   145 Kg  
Max slope in raceway ± 3 mm
Weight (without modules) 4.121 Kg  
Installation   Installable by client. It can be provided pre-mounted  
Warranty 10 years (structure) 

Driving system

Type   Electrical Motor gears  
 Transmission (azimuth)   Pinion-toothed wheel  
 Transmission (elevation)   Pinion-toothed wheel with spindle  
 Power   1 x 120 W (elevation) 1 x 90 W (azimuth)  
 Accuracy   > 0.01 º (Adjustable )  
 Azimuth range   360º (from -180º a +180º)  
 Elevation range   89º (from 1º a +90º). Expandable up to 100º  
 Warranty  3 years 

Electronics & Control

 Type   PLC controller (one by tracker)  
 Strategy   Close loop. Algorithm and optical sensor  
 Calibration   Adjustable  
 Communications  RS485, GPS (optional)  
 Night position   Adjustable  
 Electrical panel board   Totally wired. Protections included. IP65 
 Installation Installable by client. It is provided pre-mounted


According to to Peterka for 22,6 m/s wind gusts at any position and 40 m/s wind gusts in the stow position with safety factor of 1,5 "Wind load design methods for ground-based heliostats and parabolic dish colectors" J. A. Peterka; R.G. Derickson. Fluid Mechanics and Wind Engineering Program. Fluid Dynamics and Diffusion Laboratory. Department of Civil Engineering. Colorado State University.


Darse alta y baja en el boletín electronico